Unscrew all screws as shown in Fig | NEC M5, M7 instruction

2. Unscrew all screws as shown in Fig. 23

Fig. 23 Screws on the LCD Module

3. Release the LCD Bezel from the side carefully and put it aside as shown in Fig. 24

Fig. 24 Removing the LCD Bezel

Note: For the 14” LCD Models, you need to open up the LCD Bezel from either left or right side of LCD module.

B=M2x4 black

A=M2.5x7 black

Packard Bell EasyNote M5/M7 Disassembly Manual

16

Image 16

NEC M5, M7 manual Unscrew all screws as shown in Fig

Contents

Packard Bell EasyNote M5 / M7 Disassembly Manual Table of contents Disassembly Instructions Reassembly InstructionsOverview Technician Notes Hazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Removing the Hard Disk Drive Removing the Battery=M2.5x7 black =M2.5x5 black Disconnecting the hard disk drive M3x4 silver Removing the Optical Disk Drive M2.5x5 black Removing the Keyboard M2x2.5 silver Unlock the Keyboard Removing the Memory Module Removing the screw retaining the memory module slot cover Disconnecting LCD Connector Removing the LCD Module Removing the 15 LCD Panel M3x6 silver Screws on the LCD Module =M2x4 black =M2.5x7 black Removing the LCD panel screws =M2.5x7 black =M2x4 black Removing the 14 LCD Panel M2x3.5 black Unscrew all screws as shown in Fig Removing the side rubber covers =M2x4.5 Silver =M2x4 black =M2.5x7 black Removing the CPU M2x3.5 black M2.5x5 black Removing the heat sink M3x21 Removing the Bottom Cover Removing the Quick Key Board Removing screws on bottom of the system =M2.5x7 black =M2.5x5 black =M2.5x3.5 Black =Hex2.5x10 Removing the Bottom Cover Disconnecting main board and LED board Removing the Main Board Removing the MDC Modem Module M2.5x7 black M2x4.5 black Removing the Wlan Module Removing the Wlan Module Removing the Touch Pad Removing the Speaker AssemblyM2x3 black M2x3.5 black Dipswitch Settings Screws EasyNote M5/M7 Disassembly Manual