Remote Control Features

NOTE: If you are using a Macintosh computer, you can click either the right- click or left-click button to activate the mouse.

NOTE: If any one of the buttons is pressed and held for 60 seconds or more, the button operations will cease to operate. This is not a malfunction, rather it is a feature used to prolong battery power. To cancel this feature, press any one of the buttons other than the Mouse button.

1. Infrared Transmitter

Direct the remote control toward the remote sensor on the projector cabinet.

2. Laser Pointer

Beams a laser light when "Laser" button is pressed.

1

2

3

OFF ON

3. LED

Flashes when any button is pressed.

4. Power On Button

If the main power is applied, you can use this button to turn your projector on.

5. Power Off Button

If the main power is applied, you can use this button to turn your projector off.

NOTE: To turn off the projector, press and hold the POWER OFF button for a minimum of two seconds.

6. Video Button

Press this button to select an NTSC, PAL, SECAM or NTSC4.43 compatible video source from a VCR, DVD player, laser disc player or document camera.

7. S-Video Button

Press this button to select an S-Video source from a VCR.

8. RGB 1 Button

Press this button to select a video source from computer or component equipment connected to your RGB 1 port.

9. RGB 2 Button

Press this button to select a video source from computer or component equipment connected to your RGB 2 port.

10. Auto Adjust Button (RGB only)

Press this button to automatically adjust the vertical/horizontal posi- tion, clock frequency/phase and resolution if the projected picture is not centered, if there are vertical stripes on the picture or if the picture is flickering.

5

VIDEO S-VIDEO AUTO ADJ.

6

RGB 1 RGB 2

PJ

8

7

MENULASER

13*

14

R-CLICK /CANCEL

HELP

POINTER

PC CARD

KEYSTONE MAGNIFY

SLIDE

FREEZE

VOL.

FOLDER

PIC-MUTE

 

SLIDE

4

11. PJ Button

 

Press this button to switch the Mouse, Cancel/Right Click, and Enter/

10

Left Click buttons between the Projector mode (lit red) and the Com-

puter mode. Press this button or any one of the Menu, Help, Pointer,

 

11*

PC Card, Folder List or Slide List buttons to switch to the Projector

mode and the PJ button lights red. To switch back to the Computer

9

mode, press the PJ button again.

12

12. Laser Button

Press and hold this button to activate the laser pointer. When lit, you

 

 

can use the laser to draw your audience's attention to a red dot that

 

you can place on any object.

 

13. Menu Button

 

Displays the menu for various settings and adjustments.

14. Mouse (▲▼ ) / (+) (–) Button

When you are in the Computer mode, these buttons work as a computer mouse.

When you are in the Projector mode, which is indicated by lighting the PJ button:

▲▼: Use these buttons to select the menu of the item you wish to adjust.

: Use these buttons to change the level of a selected menu item. A press of the  button executes the selection.

When the pointer is displayed, these ▲▼  buttons move the pointer.

LIST

E – 10