Distance Chart
Throwing Distance (C)
Screen top 
| Screen center |
|
B | Lens Center | Throwing Angle (α ) |
| ||
|
| |
| 2.9” (79.5mm) |
|
D |
| Projector Foot |
|
|
Screen Bottom
B=Vertical distance between lens center and screen center
C=Throw distance
D=Vertical distance between lens center and screen bottom (screen top for ceiling installation)
Ceiling Installation | Screen top |
D |
| Projector Foot |
|
| |
| 2.9” (79.5mm) |
|
| Lens Center | Throwing Angle (α ) |
|
| |
B |
|
|
| Screen center |
|
Screen Bottom 
Throwing Distance (C)
WARNING
•Installing your projector on the ceiling must be done by a quali- fied technician. Contact your NEC dealer for more information.
* Do not attempt to install the projector yourself.
•Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector se- verely damaged.
•Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 32˚F (0˚C) and 104˚F (40˚C).
•Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.
•Ensure that you have adequate ventilation around your projec- tor so heat can dissipate. Do not cover the vents on the side or the front of the projector.
If your projector is mounted on the ceiling and your image is upside down, use the “Menu” and “Select” buttons on your projector cabinet or ▲▼ button on your remote control to correct the orientation. (See page
Reflecting the Image
Using a mirror to reflect your projector’s image enables you to enjoy a much larger image. Contact your NEC dealer if you need a mirror. If you’re using a mirror and your image is inverted, use the “Menu” and “Select” buttons on your projector cabinet or ▲▼ buttons on your remote control to correct the orientation. (See page
E – 16