Basic Operation

Selecting the computer or video source:

SOURCE

AUTO ADJUST

Each time the Source button is pressed, the input source will change as follows:

→ RGB1 → RGB2 → Video → S-Video → PC Card Viewer

If no input signal is present, the input will be skipped.

VIDEO

S-VIDEO

AUTO ADJ.

RGB 1

RGB 2

PJ

HELP POINTER PC CARD

Source display

Adjust the Image Using Auto Adjust

The Auto Adjust function automatically optimizes the image in RGB mode.

OFF

 

ON

 

VIDEO

S-VIDEO

AUTO ADJ.

 

RGB 1

RGB 2

PJ

AUTO ADJUST

 

MENU

 

LASER

 

[Poor picture]

[Normal picture]

Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)

This adjustment may be necessary when you connect your computer for the first time.

NOTE: The Auto Adjust function does not work for component signal.

E – 26