Connecting Your PC

IBM VGA or Compatibles (Notebook type)

RGB signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one.

Audio cable (not supplied)

IBM VGA or Compatibles (Desktop type)

USB

C CONTROL

MOOUUTSE

CRIOENNMPTOUR

PC-

CARD

AUDIO

 

AUDIO

U

TI

AUDIO

 

 

AUDIO

 

RGB

S-V

 

IDEO

 

OUTPUTMONITOR

/

 

 

AUDIO

RGB

 

RGB

INPUT

 

INPUT

 

 

AUDIO

1

 

 

 

 

 

 

RGB

INPUT

 

 

 

S-

 

 

 

VIDEO

 

2

 

 

 

 

 

 

L/

 

 

 

 

MONO

 

 

 

 

 

R

 

 

 

 

 

 

VIDEO

AC

IN

Connecting your PC to your MultiSync MT1055 and MT1050 (XGA)/ MT850 (SVGA) projector will enable you to project your computer’s screen image for an impressive presentation.

To connect to a PC, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the projector.

E – 19