NEC PA271W user manual English-20

	V.RESOLUTION	Adjusts the vertical size by increasing or decreasing the setting.
		Press “Right” button to expand the height of the image on the screen.
		Press “Left” button to narrow the height of the image on the screen.
	EXPANSION	Sets the zoom method.
		FULL: The image is expanded to full screen, regardless of the resolution.
		ASPECT: The image is expanded without changing the aspect ratio.
		OFF: The image is not expanded.
		CUSTOM: When CUSTOM is selected as the Expansion mode, it becomes possible to
		adjust the H. ZOOM., V. ZOOM, and ZOOM POS.
	SIDE BORDER	Adjusts the side black bars color between black and white.
	COLOR
Tag6	USB SELECTION	USB UP Stream Port Selection for DP/DVI-1/DVI-2/D-SUB. When connecting a computer
		to each of the upstream ports, the monitor’s USB downstream ports can be used by
		selecting this setting for the current input signal. When using only one upstream port, the
		connected upstream port is active.
	EDID EXTENSION	A communication setting with input device, containing signal timing.
	(Digital Input Only)	NORMAL: When a PC or other computer equipment is connected, select “NORMAL”.
		Enhanced: Alternate setting for non-PC devices such as DVD players or game consoles.
		Note: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any problems,
		please refer to the Troubleshooting section of this User’s Manual.
		When EDID EXTENSION has been changed, the connected equipment has to be
		restarted.
	VIDEO DETECT*2	Selects the method of video detection when more than one computer is connected.
		Press “Left” or “Right” to select.
		FIRST: When current video input signal is not present, then the monitor searches for
		a video signal from the other video input port. If the video signal is present in the other
		port, then the monitor switches the video source input port to the new found video source
		automatically. The monitor will not look for other video signals while the current video
		source is present.
		LAST: When the monitor is displaying a signal from the current source and a new
		secondary source is supplied to the monitor, then the monitor will automatically switch to
		the new video source. When current video input signal is not present, then the monitor
		searches for a video signal from the other video input port. If the video signal is present
		in the other port, then the monitor switches the video source input port to the new found
		video source automatically.
		NONE: The Monitor will not search the other video input port unless the monitor is
		turned on.
	OFF TIMER	Monitor will automatically turn off after the preset time period from power on with the
		ON/OFF function. When you select “ON”, press “SELECT” and “Left” or “Right” to adjust.
		Before powering off, a message will appear on the screen asking the user if they want to
		delay the turn off time by 60 minutes. Press any OSD button to delay the turn off time.
	OFF MODE	The Intelligent Power Manager allows the monitor to enter into a power saving mode after
		a period of inactivity. The OFF MODE has three settings.
		OFF: Monitor does not go into power save mode when the input signal is lost.
		STANDARD: Monitor enters power save mode automatically when the input signal is lost.
		OPTION: Monitor enters power save mode automatically when the amount of
		surrounding light goes below the level that is determined by the user.
	OFF MODE SETTING	Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance.
	LED BRIGHTNESS*2	Controls the brightness of the power LED on the monitor.
	LED COLOR*2	Toggles the power LED on the front between blue or green.
Tag7	LANGUAGE*2	OSD control menus are available in eight languages. Press “Left” or “Right” to select.
	OSD H.POSITION	You can choose where you would like the OSD control image to appear on your screen.
		Selecting OSD Location allows you to manually adjust the position of the OSD control
		menu left or right.
	OSD V.POSITION	You can choose where you would like the OSD control image to appear on your screen.
		Selecting OSD Location allows you to manually adjust the position of the OSD control
		menu up or down.
	OSD TURN OFF	The OSD control menu will stay on as long as it is use. You can select how long the
		monitor waits after the last touch of a button to shut off the OSD control menu.
		The preset choices are 10-120 seconds in 5 second increments.

*2 This item does not reset by FACTORY PRESET (Tag7).

English-20