NEC PA271W user manual English-21

	OSD LOCK OUT*2	This control completely locks out access to all OSD control functions. When attempting
		to activate OSD controls while in the Lock Out mode, a screen will appear indicating the
		OSD controls are locked out.
		There are three types of OSD LOCK OUT:
		OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,
		then “Right” button and hold down simultaneously. To deactivate the OSD Lock Out,
		press SELECT, then “Right” button and hold down simultaneously while in the OSD
		menu. No controls can be adjusted while in the lock out mode.
		OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out
		function, press SELECT, then “Down” and “Left” buttons and hold down simultaneously.
		To deactivate the OSD Lock Out, press SELECT, then “Down” and “Left” buttons and
		hold down simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while
		in the lock out mode.
		CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or
		DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS), PICTURE MODE,
		WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock
		Out function, press RESET and EXIT to bring up the LOCK OUT warning.
		Press SELECT, SELECT, <, >, <, >, EXIT.
	OSD TRANSPARENCY	Adjusts the transparency of the OSD MENU.
	OSD COLOR*2	“Tag window frame color”, “Item select color” & ”Adjust Window frame color” can be
		changed.
	BOOT LOGO*2	The NEC logo is briefl y displayed after the monitor is powered on. This feature can be
		turned on or off in the OSD.
		Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO
		menu will appear. It is possible to change the BOOT LOGO setting to OFF.
	SIGNAL	Signal information can be displayed in the corner of the screen.
	INFORMATION*2	Signal information is either “On/Off”.
	RESOLUTION	The optimal resolution is 1920 x 1200 for PA241W or 2560 x 1440 for PA271W. If ON is
	NOTIFIER*2	selected, a message will appear on the screen after 30 seconds, notifying you that the
		resolution is not set to 1920 x 1200 for PA241W or 2560 x 1440 for PA271W.
		Press “Left” or “Right” to select.
	HOT KEY*2	When this function is activated; the brightness of the monitor can be adjusted without
		entering the OSD menu by using the front buttons.
		The “Left” or “Right” buttons adjust the brightness level.
		When this function is set to OFF, some buttons are disabled. See page 9.
	FACTORY PRESET*2	Selecting Factory Preset allows you to reset all OSD control settings back to the factory
		settings. Highlighting the control to be reset and pressing the RESET button can reset
		individual settings.
Tag8	PIP MODE	Selects PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY
		PICTURE - FULL. See page 12.
	PIP INPUT	Selects the PIP input signal.
	PIP LEFT/RIGHT	When you select “PIP” in PIP MODE, you can control horizontal position of PIP display
		area.
	PIP DOWN/UP	When you select “PIP” in PIP MODE, you can control vertical position of PIP display area.
	PIP SIZE	Selects the size of the sub-picture used in PIP mode.
	BLANK SIGNAL SKIP	Skip no signal inputs when you change input signal with INPUT button.
	OSD ROTATION	AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is
		set to AUTO by default.
		LANDSCAPE: Display the OSD with landscape mode.
		PORTRAIT: Display the OSD with portrait mode.
	IMAGE ROTATION	AUTO: The display image automatically rotates according to the orientation of the
		display. If “AUTO” is selected in the “OSD ROTATION” menu, the display image rotates
		according to the orientation of the monitor.
		OFF: The display image is not rotated. IMAGE ROTATION is set to OFF by default.
		ON: The display image always rotated.
		Note: For PA271W, this function is effective only if PICTURE BY PICTURE-ASPECT or
		PICTURE BY PICTURE-FULL.

*2 This item does not reset by FACTORY PRESET (Tag7).

English

English-21