Chapter 2 Installing NEC Storage PathManager
Make sure to use HotFix (Q323289_W2K_SP4_X86_EN.exe) contained in the Setup CD
when installing NEC Storage PathManager in a Windows 2000 Service Pack 3 environment. HotFix
solves the Windows 2000 memory leak problem that would affect NEC Storage PathManager. HotFix is
for use only in a Windows 2000 Service Pack 3 environment. Never use HotFix in any other
environments. This HotFix is included in Windows 2000 Service Pack 4.
/1/ Completely disconnect the server and NEC Storage while the server is turned off.
/2/ Turn the server on and log in as an administrative user.
/3/ Insert the Setup CD into the CD drive unit.
/4/ Follow the instructions of the installer to install NEC Storage PathManager.
/5/ Once the installation is complete, connect NEC Storage and the server used in installation (if you are
requested to reboot the system, first reboot the system and then make the above connection).
For further information regarding installation procedures, refer to the "Storage PathManager Installation
Guide."
2.
.2.3 U
Uninstallation
2
2.2
2.
.3
3
Un
ni
in
ns
st
ta
al
ll
la
at
ti
io
on
n
Use the Setup CD and follow the procedures below to uninstall NEC Storage PathManager.
/1/ Completely disconnect the server and NEC Storage while the server is turned off.
/2/ Turn the server on and log in as an administrative user.
/3/ Insert the Setup CD into the CD drive unit.
/4/ The dialogue box [Storage PathManager Maintenance] will be displayed. Click on the [Uninstall]
button.
/5/ Follow the instructions of the installer to uninstall NEC Storage PathManager.
For further information regarding uninstallation procedures, refer to the "Storage PathMa nager Installation
Guide."
II-4