NEC R 37 Xtra Remote Control Unit

Remote Control Unit

NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel.

1 POWER ON/OFF

Press POWER ON to turn the monitor on when the POWER/STANDBY indicator is lit amber.

Press POWER OFF to turn the monitor off and the monitor will go into the standby condition.

		2 DEGAUSS
1
		Press to demagnetize the picture tube in the manual operation. See also
3		page 27.
3

53 Input Select

EXIT

VIDEO 1 ..... Press to select an NTSC, PAL, SECAM or M-NTSC

6	compatible video source from a VCR, laser disc player, document camera,

	or an S-Video source from a VCR connected to the VIDEO 1 IN terminal.
	VIDEO 2 ..... Press to select an NTSC, PAL, SECAM or M-NTSC

SCAN

WIDTH HEIGHT SIDE PIN NORMAL

NORMAL

BRIGHT CONTRAST MUTE VOLUME

MULTIMEDIA MONITOR

RD-346E

79644641

compatible video source from a VCR, laser disc player, document camera,

or an S-Video source from a VCR connected to the VIDEO 2 IN terminal.

RGB 1 ....... Press to select an RGB video source from a computer

connected to the RGB 1 IN terminal.

RGB 2 ....... Press to select an RGB/component video source from a

computer, NEC scan converter or YPBPR/YCBCR Signal source connected

to the RGB 2 IN terminal.

OSM Control

4POSITION/CONTROL

POSITION() ...... Adjusts the vertical position of the image up and down, and the horizontal position of the image from left to right.

CONTROL ( + / - ) ..... Moves the bar in the + or - direction to increase or decrease the adjustment in an OSM menu.

CONTROL( / ) .. Select one of the controls in an OSM menu. Press to select a higher item in the menu; pressto select a lower item in the menu.

5PROCEED

Press to access OSM. When an adjustment item is selected, a press of this button returns to its icon selection screen.

6EXIT

Press to exit the OSM mode.

NOTE: The direct keys such as BRIGHT, CONTRAST, WIDTH, HEIGHT, SIDE PIN can access each control while in the OSM mode.