Battery Installation and Replacement

The remote control is powered by two 1.5V AA batteries.

1. Turn the remote control unit upside

2. Install the two new batteries, making

down. Press down on the battery

sure that their polarity matches the (+)

compartment grip and slide the

(-) diagrams inside the battery

compartment in the direction of the

compartment. Incorrect polarity could

arrow.

damage the remote control unit.

Remote Control Cautions

•Do not drop or mishandle the remote control unit.

•Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control unit for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types of batteries together.

• Do not take apart the batteries, heat them, or throw them into a fire.

Operating Range

•The infrared signal operates by line-of-sight up to a distance of approximately 22 feet/7 m and within a 60 degree angle of the remote sensor of the monitor.

•The monitor will not function if there are objects between the remote control and the sensor or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the monitor.

15

3. Close the battery compartment cover.

30° 30°

 

POWER

DEGAUSS

OFF

ON

VIDEO 1 VIDEO 2

RGB 1

RGB 2

POSITION/CONTROL

PROCEED

 

 

EXIT

 

 

SCAN

WIDTH HEIGHT

SIDE PIN NORMAL

NORMAL

BRIGHT CONTRAST MUTE VOLUME

16

13