If the monitor does not reproduce the color for a

 

 

component signal correctly, the monitor will select

 

 

YCBCR/YPBPR in accordance with an output format of

 

 

the connected equipment such as DVD player or DTV

 

 

tuner.

 

 

Selecting RGB CTL allows you to adjust the Color,

 

 

Tint, Sharpness, Gamma, Dynamic Picture control for

 

 

RGB signals -provided horizontal frequencies of

 

 

these RGB signals must be 60 kHz and below.

 

 

This mode is recommended for displaying movie or

 

 

graphics.

 

 

 

 

 

NOTE: Component signals (YPBPR) refers to the

 

 

signals of 1920 x 1080/60/2:1 and 1280 x 720/60/

 

 

1:1.

GAMMA

: Pressing + s emphasizes the brightness of neutral

 

 

tint; - the darkness of neutral tint.

DYNAMIC PICTURE

: Pressing + rotates OFF, LOW, MEDIUM or HIGH in

 

 

this order.

 

 

Selecting HIGH emphasizes black color on a picture.

37

Volume Control

The Volume control allows you to adjust the volume.

R G B DV

V O L U M E

B A S S

T R E B L E

B A L A N C E

S U R R O U N D M O D E

VOLUME : Pressing + or - increases or decreases the volume.

NOTE: When you mutes the sound, the MUTE display appears.

BASS

: Increases or decreases the bass.

TREBEL

: Increases or decreases the treble.

BALANCE

: Adjusts the balance between the right and left speakers.

SURROUND MODE : Selects OFF, MOVIE, and MUSIC in this order. 1. OFF : Turns off the surround effect.

2.MOVIE : Gives a surround effect for cinema.

3.MUSIC : Gives a surround effect for music.

Reset Control

The Reset control allows you to return image parameters to factory presets.

All Raster Settings

R G B DV

A L L R A S T E R N O R M A L

A L L V I S U A L N O R M A L

A L L N O R M A L

P R E S S

' P R O C E E D ' T O R E S E T

The above warning statement will appear to confirm that you do want to reset all raster settings. If you want to reset all raster settings, press PROCEED.

The following items can be reset:

H-POSITION, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER, V- POSI, V-HEIGHT, V-LIN1, V-LIN2, KEYSTONE, TILT and ROTATION.

All Visual Settings

The above warning statement will appear to confirm that you do want to reset all visual settings. If you want to reset all visual settings, press PROCEED. The following items can be reset:

BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP., R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.

38

24