![Protection](/images/new-backgrounds/38603/3860329x1.webp)
Protection ![Operating condition](/images/new-backgrounds/38603/3860329xi2.webp)
Operating condition
The protective device maybe trip and stop the appliance in the cases listed below.
HEATING | Outdoor air temperature is over 32oc | |
Outdoor air temperature is below | ||
| Room temperature is over 32oc | |
COOLING | Outdoor air temperature is over 50oc | |
Room temperature is below 18oc | ||
| ||
DRY | Room temperature is below 18oc |
If the air conditioner runs in COOLING or DRY mode with door or window opened for a long time when relative humidity is above 80%,dew may drip down from the outlet.
Noise pollution
Install the air conditioner at a place that can bear its weight in order to operate more quietly.
Install the outdoor unit at a place where the air discharged and the operation noise would not annoy your neighbors.
Do not place any obstacles in front of the air outlet of the outdoor unit lest it increases the noise level.
Features of protector
The protective device will work at following cases.
Restarting the unit at once after operation stops or changing mode during operation, you need to wait 3 minutes.
Connect to power supply and turn on the unit at once, it may start 20 seconds later.
If all operation has stopped, press ON/OFFbutton again to restart, Timer should be set again if it has been canceled.
Features of HEATING mode
Preheat
At the beginning of HEATING operation, the airflow from indoor unit is discharged
Defrost
In HEATING operation the appliance will defrost
After defrosting completes, it returns to HEATING mode automatically.
Note: Heating is NOT available for cooling only air conditioner models.
13
PDF created with pdfFactory Pro trial version www.pdffactory.com