Installation instructions

Outdoorunitinstallation

1.Install Drain Port and Drain Hose (for heat-pump model only)

The condensate drains from the outdoor unit when the unit operates

 

 

in heating mode. In order not to disturb your neighbor and protect

 

 

the environment, install a drain port and a drain hose to direct the

 

 

condensate water. Just install the drain port and rubber washer to

 

 

the chassis of the outdoor unit, then connect a drain hose to the

 

Washer

port as the right figure shown.

Drain port

Drain hose

 

2. Install and Fix Outdoor Unit

 

(prepare by user)

 

 

Fix with bolts and nuts tightly on a flat and strong floor.

 

 

If installed on the wall or roof, make sure to fix the supporter well to prevent it

 

from shaking due to serious vibration or strong wind.

 

 

3. Outdoor Unit Piping Connection

 

 

Remove the valve caps from the 2-way and 3-way valve.

Connect the pipes to the 2-way and 3-way valves separately according to the required torque.

4. Outdoor Unit Cable Connection (see previous page)

Airpurging

The air which contains moisture remaining in the refrigeration cycle may cause a malfunction on the compressor. After connecting the indoor and outdoor units, evacuate air and moisture from refrigerant cycle using a vacuum pump, as shown below.

Note: To protect the environment, be sure not to discharge the refrigerant to the air directly.

See next page for air purging steps.

Vacuum pump

indoor unit

Service port

(2)Turn

(8)Tighten

Refrigerant flow direction

2-way valve

3-way valve diagram

 

3-way valve

 

 

 

connect to indoor unit

(6) Open 1/4 turn

(7) Turn to fully open the valve

(1) Turn

Valve cap

(8) Tighten

(7)Turn to fully open the valve valve cap

(1) Turn

(8) Tighten

Connect to outdoor unit

Valve core

21

open position spindle

needle

service port cap

PDF created with pdfFactory Pro trial version www.pdffactory.com

Page 23
Image 23
NEC RIH-6867 user manual Outdoor unit installation, Air purging, Vacuum pump

RIH-6867 specifications

The NEC RIH-6867 is a cutting-edge, high-performance server designed to meet the demands of modern data centers. Its robust architecture and advanced technologies make it suitable for a wide range of applications, from cloud computing to enterprise resource planning.

One of the standout features of the RIH-6867 is its impressive processing power. The server is powered by the latest generation of Intel Xeon processors, allowing it to handle multiple workloads simultaneously. This multi-core architecture enhances performance in virtualized environments, ensuring that businesses can run resource-intensive applications without encountering bottlenecks.

Memory capacity is another key aspect of the RIH-6867. The server supports large volumes of RAM, enabling it to perform high-speed data processing and rapid information retrieval. This capability is particularly beneficial in scenarios that require real-time data analytics and high throughput. Additionally, the use of error-correcting code (ECC) memory ensures data integrity and reliability, which are crucial for mission-critical applications.

The NEC RIH-6867 also excels in storage options. It offers various configurations, including support for both HDD and SSD drives. This flexibility allows organizations to choose the storage solution that best fits their needs, balancing speed and capacity. Furthermore, integrated RAID support enhances data protection, providing redundancy and improving fault tolerance.

Networking capabilities are robust in the RIH-6867. The server features multiple Ethernet ports, supporting high-speed networking for seamless data transfers. This ensures that the server can efficiently communicate with other devices within the data center, contributing to overall operational efficiency.

Power efficiency is a significant consideration in the design of the RIH-6867. The server is equipped with advanced power management technologies that optimize energy consumption, which can lead to reduced operational costs over time. This aspect is particularly appealing for organizations focused on sustainability and minimizing their carbon footprint.

In addition, the NEC RIH-6867 is designed with maintainability in mind. Hot-swappable components and modular design facilitate easy upgrades and repairs, minimizing downtime and keeping maintenance costs low.

In summary, the NEC RIH-6867 integrates high-performance processing, extensive memory capacity, flexible storage solutions, and efficient networking capabilities. Its focus on energy efficiency and maintainability positions it as a premier choice for enterprises looking to enhance their IT infrastructure.