NEC RIH-6867 user manual Operation instructions, SMARTmode

Operation instructions

SMARTmode

Press the SMART button, the unit enters smart mode(fuzzy logic operation) directly regardless of the unit is on or off. In this mode, temperature and fan speed are automatically set based on the actual room temperature.

Operation mode and temperature are determined by indoor temperature

Heat pump models

	Indoor temperature	Operation mode	Target temperature
	21℃ or below	HEATING	22℃
		DRY	Room temperature
	21℃-26℃		decrease 1.5℃ after
			operate for 3 minutes
	Over 26℃	COOLING	26℃
Cooling only models
	Indoor temperature	Operation mode	Target temperature
	26℃ or below	DRY	Room temperature
			decrease 1.5℃ after
			operate for 3 minutes
	Over 26℃	COOLING	26℃

SMART button is ineffective in SUPER mode.

Note: Temperature, airflow and direction are controlled automatically in SMART mode. However, a decrease or rise of up to 2 ℃ can be set with the remote controller if you still feel uncomfortable.

A decrease or increase up to 2℃ can be set in SMART mode

Your feeling	button	adjustment procedure
Slightly warmer		Press once to lower the	High
		set temp by 1℃	Low
A decrease up
		Press twice to lower the	High
to 2℃ can be set
		set temp by 2 ℃	Low
Slightly cooler		Press once to raise the	High
		set temp by 1 ℃	Low
A rise up to
		Press twice to raise the	High
2℃ can be set
		set temp by 2℃.	Low
Uncomfortable		Indoor fan speed alternates among
because of
unsuitable air		High, Medium and Low each time this
flow volume.		button is pressed.
Uncomfortable		Press it once, the vertical adjustment
because of		louver swings to change vertical airflow
unsuitable flow		direction. Press it again, swings stops.
direction.		For horizontal airflow direction, please
		refer to the previous page for details.

SU PER SM ART

SLEEP

9

PDF created with pdfFactory Pro trial version www.pdffactory.com