Operation instructions
Operationmodes
Selecting mode
Each time MODE button is pressed, the operation mode is changed in sequence:
COOLING DRY FAN ONLY HEATING
Heating mode is NOT available for cooling only air conditioner.
FAN mode
Each time the "FAN" button is pressed, the fan speed is changed in sequence:
Auto High Medium Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, airflow is set at "Low" automatically, "FAN" button is ineffective in this case.
Setting temperature
Press once to raise temperature setting by 1℃
Press once to lower temperature setting by 1℃
Range of available set temperature
*HEATING, COOLING | 18 ~32 |
DRY | room temperature + 2 |
| - |
FAN ONLY | unable to set |
*Note: Heating mode is NOT available for cooling only models.
Turning on
SUPERSMART
| 3 | 1 |
|
| |
2 | SLEEP |
|
|
|
4
Press button, when the appliance receives the signal, the RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER, SLEEP and SUPER operation modes will be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
7
PDF created with pdfFactory Pro trial version www.pdffactory.com