NEC VT440, VT540 Connecting Your PC, IBM VGA or Compatibles, Signal cable supplied, Audio cable

Connecting Your PC

IBM VGA or Compatibles

(Notebook type)

IBM VGA or Compatibles

(Desktop type)

Signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recom- mended that you use a commercially available distribution ampli- fier if connecting a signal cable longer than the supplied one.

RGB		INPUT
		AUDIO
OUTPUT			AUDIO
		IN
PC-			OUT
		OUT
CONTROL			IN
	S-
	VIDEO
		VIDEO

Audio cable

(not supplied)

Connecting your PC to your MultiSync VT440 (SVGA)/ VT540 (XGA) projector will enable you to project your computer’s screen image for an impressive presentation.

To connect to a PC, simply:

1.Turn off the power to your projector and computer.

2.Use the supplied signal cable to connect your PC to the projector.

3.Turn on the projector and the computer.

4.If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you’ve connected to the projector.

E–18