Remote Control Features
1 Source Button
Press to select a video source.
2 Auto Adjust Button
Use this button to adjust
3 Menu Button
Displays the menu.
4 Select (▲▼ ) / Volume (+) (–) Buttons
▲▼ : Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a selected menu item.
A press of the button executes the selection. When no menus appear, these ▲▼ buttons work as a volume control.
When the pointer is displayed, these ▲▼ buttons move the pointer.
5 Enter Button
Use this button to enter your menu selection.
6 Cancel Button
Press this button to exit “Menus”. Press this button to return the adjustments to the last condition while you are in the adjustment or setting menu.
7 Magnify Button
Use the (+) or
When the image is magnified, the pointer is changed to the magni- fying icon.
8 Pointer Button
Press this button to display one of the eight pointers; press again to hide the pointer. You can move your pointer icon to the area you want on the screen using the Select button.
9 Picture Mute Button
This button turns off the image and sound for a short period of time. Press again to restore the image and sound.
10 Help Button
Provides information about operation and adjustment procedures or the set information for the current menu or adjustment during menu operation. This also displays information how to use the Help.
11 Power Button
If power is applied, you can use this button to turn your projector on and off.
NOTE: To turn off the projector, press and hold the POWER but- ton for a minimum of two seconds.
Remote Control |
|
|
|
|
|
|
| 12 |
1 | SOURCE |
| AUTO | 2 | ||||
|
| |||||||
|
|
|
|
| ADJ. |
|
| |
|
|
| U |
|
|
|
|
|
3 | M | E | N |
|
|
|
|
|
| Vol.+ |
|
|
|
| |||
|
|
|
|
|
| 4 | ||
|
|
|
|
|
|
|
| |
|
|
|
| SELECT |
|
|
|
|
| E |
|
| Vol.– |
|
| E | L |
5 | N |
|
|
| C |
| 6 | |
| E |
| N |
| ||||
| T |
|
|
|
|
| ||
|
|
| R |
| A |
|
|
|
|
|
|
|
| C |
|
| 8 |
|
|
|
|
|
|
|
| |
|
|
|
| POINTER | PIC. |
|
|
|
|
|
|
| MUTE |
| 9 | ||
|
|
|
|
|
| |||
| MAGNIFY |
|
|
|
| |||
7 |
|
|
|
|
| |||
|
|
| HELP | POWER |
|
| ||
|
|
|
|
| 11 | |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
10
NOTE: Remove the transparent insulation tape before use. See page
|
| H | ||
|
|
| N | |
|
|
| A | |
n | CR20253V |
| P | |
| A | |||
|
|
|
| J |
M |
| OL | T | S |
|
|
| ||
12 Infrared Transmitter
Direct the remote control toward the remote sensor on the projec- tor cabinet.
Remote Control Precautions
•Handle the remote control carefully.
•If the remote control gets wet, wipe it dry immediately.
•Avoid excessive heat and humidity.
•Do not place the battery upside down.
NOTE: Before you use the card remote control for the first time, be sure to remove the insulation tape from the card remote control.
*Keep the coin cell battery out of reach of children so as not to allow them to swallow the cell battery.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to your local regulations.
