NEC VT540, VT440 user manual Wiring Diagram, E-17

Wiring Diagram

Macintosh or Compatibles (Desktop type or notebook type)

Pin adapter for Macintosh (supplied)

Speaker System

	RGB INPUT	AUDIO		IBM VGA or Compatibles
				(Desktop type or notebook type)
Monitor		IN	OUT
	RGB OUTPUT		IN
		OUT		Signal cable (supplied)
				To mini D-Sub 15-pin connector on the
				projector. It is recommended that you
				use a commercially available distribution
	PC CONTROL	S-VIDEO		amplifier if connecting a signal cable
			VIDEO	longer than the supplied cable.
				DVD Player (with component output)
				Optional Component V cable
VCR, DVD Player or LaserDisc Player
				Document Camera

To video, S-video, and audio inputs on the projector.

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

NOTE:

*If the screen goes blank while using your remote control, it may be the result of the computer’s screen- saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 30 seconds and then press the POWER button again to resume.

NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.

E–17