STEP 10 (See Cable Loop Diagram & Diagram 10)
A.) Attach one end of the 143” Butterfly Cable (#56) to the Clip on the Butterfly Pulley Bracket (#17) on the right side. Draw the Cable to the Butterfly Pulley Support (#16).
B.) Attach a Pulley (#66) to the open bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#113), two Ø ¾” Washers (#124), and one M10 Aircraft Nut (#128).
C.) Draw the Cable over the Pulley then pull downward. Repeat Step B above to install a Pulley to the Single Floating Pulley Bracket (#35). Let the Pulley hanging for now.
D.) Draw the Cable around the Pulley then pull upward to the open bracket on the left side of the Butterfly Pulley Support (#16). Repeat Step B to install another Pulley.
E.) Draw the Cable over the Pulley then to the left Butterfly Pulley Bracket. Secure the end of the Cable to the Clip.
DIAGRAM 10
17
