1. Introduction

Bottom

Lamp Cover (See page 53)

Adjustable Tilt Foot (See page 27)

Adjustable Tilt Foot Lever (See page 27)

Adjustable Tilt Foot Lever (See page 27)

For VT670 and VT470 only

Attaching the supplied carrying handle

You can carry the projector by attaching the supplied carrying handle securely to the projector. To attach the supplied carrying handle, use the supplied flathead screwdriver and two screws.

Place a soft cloth on the working surface before turning the projector over to prevent scratching the top cover. Make sure that the carrying handle is attached with correct orientation as shown below.

Flathead screwdriver

Screw

Carrying handle

CAUTION

When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight.

5