![](/images/backgrounds/112615/112615-8325x1.png)
2. Installation and Connections
NOTE: The projector is not compatible with video decoded outputs of either the NEC
NOTE: An image may not be displayed correctly when a Video or
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
*When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ button on the remote control or the projector cabinet.
To connect SCART output (RGB)Projector
COMPUTER 1 IN
VIDEO IN | L/MONO | AUDIO | R |
| COMPUTER 1 IN | AUDIO | COMPUTER 2 IN |
L/MONO | AUDIO | R | AUDIO OUT |
| PC CONTROL |
|
AC IN
![](/images/backgrounds/112615/112615-8325xi3.png)
![](/images/backgrounds/112615/112615-8325xi4.png)
![](/images/backgrounds/112615/112615-8325xi5.png)
Before connections: An exclusive SCART adapter
2.Use the NEC
3.Connect the supplied power cable. See page 22.
4.Turn on the power to the projector and your video equipment.5.Use the COMPUTER 1 button on the projector cabinet to select the COMPUTER 1 input.
Use the COMPUTER button on the projector cabinet to select the COMPUTER input on VT47.
6.Press the MENU button on the projector cabinet to display the menu.7.From the menu, select [Advanced] → [Signal Select] → [Computer 1 ([Computer] on VT47)] → [Scart].
SCART is a standard European
NOTE: The
18