3. Projecting an Image (Basic Operation)

￿Turning off the Projector

To turn off the projector:

First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button (the POWER button on VT570/VT47) on the remote control.The “Power Off / Are you sure?” message will appear.

LAMP

 

 

STATUS

 

 

POWER

VIDEO

S-VIDEO COMPUTER-1 COMPUTER-2

SELECT

ON/STAND BY

AUTO

ADJ.

Secondly, press the ENTER button or press the POWER (ON/STAND BY), the POWER OFF or the POWER button again.

The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cooling-off time).

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 sec- onds.

Finally, turn off the Main Power switch.The power indicator will go out.

VT670/VT470

VT570/VT47

OFF

ON

SELECT

 

POWER

 

 

 

MAGNIFY PIC-MUTE

PAGE

 

 

 

UP

 

 

 

DOWN

 

 

MENU

 

SOURCE

PIC-MUTE

 

 

ASPECT

POWER

ENTER

EXIT

 

 

L-CLICK

R-CLICK

 

 

Power On

 

Fan running

Standby

LAMP

 

LAMP

LAMP

STATUS

 

STATUS

STATUS

POWER

 

POWER

POWER

Steady green light

 

Blinking

Steady orange

 

 

orange light

light

CAUTION

Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector:

• While the Hour Glass icon appears.

• While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off).

￿After Use

Preparation: Make sure that the projector is turned off.1.Unplug the power cable.2.Disconnect any other cables.3.Retract adjustable tilt feet if extended.4.Cover the lens with the lens cap.5.Put the projector and its accessories in the supplied soft carrying case.

32