5. Using On-Screen Menu

Adjusting the Vertical Position of Image [Cinema Position] (for Cinema only)

This feature adjusts the vertical position of the image when viewing video with Cinema aspect ratio selected. When “Cinema” is selected in “Aspect Ratio”, the image is displayed with black borders on the top and bottom. You can adjust the vertical position between top and bottom.

NOTE: This option is available only when “Cinema” is selected in Aspect Ratio.

￿Menu Descriptions & Functions [Setup]

Using Off Timer [Off Timer]

You can set the timer so that the projector turns itself off at the preset time.

1.Use the SELECT ￿￿ to select your desired time between 30 minutes and 8 hours: Off, 0:30, 1:00, 2:00, 3:00, 4:00, 6:00 and 8:00.

2.Press the ENTER button.3.The Off Timer starts counting down remaining time.4.The projector turns off after the countdown is complete.

NOTE:

To cancel the preset time, select “Off” for the preset time or turn off the power.

When the remaining time reaches 3 minutes before the projector is turned off, the “Projector will turn off in 3 minutes” message will be displayed on the bottom of the screen.

Selecting Lamp Mode [Lamp Mode]This feature enables you to select two brightness modes of the lamp:Normal and Eco modes. The lamp life can be extended by using the Eco mode.

Normal Mode ........

This is the default setting (100% Brightness).

Eco Mode ..............

Select this mode to increase the lamp life (80% Brightness).

NOTE: If the projector is overheated in Normal mode, there may be a case where the Lamp mode automatically changes to Eco mode to protect the projector. When the projector is in Eco mode, the picture brightness decreases. When the projector comes back to normal temperature, the Lamp mode returns to Normal mode.

NOTE: Thermometer symbol indicates the lamp mode is automatically set to Eco mode because the internal temperature is too high.

43