1. Introduction

For VT570/VT47

1

2 3

 

SELECT

4

5

6

7

SOURCE

PIC-MUTE

8

ASPECT

1.Infrared Transmitter

Direct the remote control toward the remote sensor on the projector cabinet.

2.MENU Button

Displays the menu for various settings and adjust- ments.

3.SELECT ￿￿￿￿ / Volume Buttons

￿￿: Use these buttons to select the menu of the item you wish to adjust.

￿￿: Use these buttons to change the level of a se- lected menu item. A press of the ￿ button ex- ecutes the selection. When no menus appear, these buttons work as a volume control.

4.ENTER ButtonExecutes your menu selection and activates items se- lected from the menu.5.EXIT Button

Pressing this button will return to the previous menu. While you are in the main menu, pressing this button will close the menu.

6.SOURCE Button

Press this button to select a video source such as a PC, VCR or DVD player. Each time this button is pressed, the input source will change as follows:

VT570Computer1 → Computer2 → Video → S-Video → Computer1 → ...VT47Computer → Video → S-Video → Computer → ...

9

POWER

7.PIC-MUTE ButtonThis button turns off the image and sound for a short period of time.Press again to restore the image and sound.8.ASPECT Button

Press this button once to display the Aspect Ratio select menu. Keep pressing will change aspect ratios. See page 42.

9.POWER Button

Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.

To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector, press this button once to display the confirmation message and then press the POWER button or EN- TER button.

11