NEC X461UN Power Indicator, Using Power Management, Selecting a video source, Picture Aspect

Power Indicator

Mode	Status Indicator Light
Power ON	Green*2
Power OFF (Eco Standby)*1	Red
Power consumption under 0.5W*3
Power OFF (Standby)	Amber
Power consumption under 2W*3
Power Save	Amber Blinking
Power consumption under 2W*3
Power Standby when	Green and Amber blink alternately
ÒSCHEDULE SETTINGSÓ enabled
Diagnosis (Detecting failure)	Red Blinking
	(See Troubleshooting page 34)

*1 When in Eco Standby Mode RS-232C and LAN controls do not function. *2 If ÒOFFÓ is selected in POWER INDICATOR (page 23), the LED will not

light when the LCD monitor is in active mode.

*3 ÒRS-232CÓ is selected in EXTERNAL CONTROL.

Using Power Management

The LCD monitor follows the VESA approved DPM Power Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period.

The power management feature on your new display has been set to the ÒONÓ mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.

STANDBY mode is used when the display is connected to an RS-232C cable or when using the INPUT DETECT function.

ECO STANDBY uses less power, but the RS-232C and INPUT DETECT functions are not available.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Aspect

DVI, VGA, RGB/HV

FULL ZOOM NORMAL

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*

FULL WIDE ZOOM NORMAL

Aspect ratio Unchanged view*1	Recommended selection
of image	for picture aspect*1
	NORMAL
4:3	ZOOM
	(DYNAMIC)

FULL

Squeeze

WIDE

Letterbox

*1 Grey areas indicate unused portions of the screen.

NORMAL: Displays the aspect ratio the same as it is sent from the source.

FULL: Fills entire screen.

WIDE: Expands a 16:9 letter box signal to fill entire screen.

ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image area will be cut off due to expansion.

ZOOM

The image can be expanded beyond the active display area. The image which is outside of active display area is not shown.

ZOOM

ZOOM

Information OSD

The Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD.

ID number assigned to current monitor*3

ID number assigned monitor to be controlled via RS-232C*4

Input Name

Audio input mode

Picture aspect

Input Signal Information

Sub picture information

*3: ÒIR CONTROLÓ should be set ÒPrimaryÓ or ÒSecondaryÓ.

*4: ÒIR CONTROLÓ should be set ÒPrimaryÓ.

*: The product you purchased may not have this feature.

English

English-17