NEC X461UN user manual Display Protection, Advanced Option, English-24

DISPLAY PROTECTION

POWER SAVE		Sets how long the monitor waits to go into power save mode after a lost signal.	ON
All inputs except for TV*		Note: When connecting DVI, video card might not stop sending digital data even if image has
		disappeared. In this case the monitor does not get to power management mode.
STANDBY MODE		Lowers power consumption.	STANDBY
		Note: RS-232C and LAN Function are lost when in Eco Standby mode.
HEAT STATUS		Displays status of the FAN, BRIGHTNESS and TEMPERATURE.	-
FAN CONTROL		Cooling fan reduces the temperature of the display to protect from overheating.	AUTO
		If ÒAUTOÓ is selected, you can adjust the start temperature of the cooling fan and fan speed.
SCREEN SAVER		Use the SCREEN SAVER function to reduce the risk of Image Persistence.
	GAMMA	The display gamma is changed and fixed when ÒONÓ is selected.	OFF
	BRIGHTNESS	The brightness is decreased when ÒONÓ is selected.	OFF
		NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
	MOTION	The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT)	OFF
		at user determined intervals. You can set interval time and zooming ratio.
SIDE BORDER COLOR		Adjusts the color of the side borders when a 4:3 image is displayed.	15
		Press + button, the bar will become lighter.
		Press - button, the bar will become darker.
AUTO BRIGHTNESS		Adjusts the brightness level according to the input signal.	OFF
DVI, VGA, RGB/HV inputs only		NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
CHANGE SECURITY		Allows the security password to be changed.	-
PASSWORD		The factory preset password is 0000.
SECURITY LOCK		Locks the security password.	OFF
DDC/CI		ENABLE/DISABLE: Turns On or OFF the two way communication and control of the monitor.	ENABLE
DISPLAY PROTECTION		Resets the following settings within the DISPLAY PROTECTION menu back to factory setting:	-
RESET		POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR,
		AUTO BRIGHTNESS, DDC/CI.
ADVANCED OPTION
INPUT DETECT		Selects the method of input detection the monitor uses when more than two input devices	FIRST DETECT
All inputs except for TV*		are connected.
	NONE	The Monitor will not search the other video input ports.
	FIRST DETECT	When the current video input signal is not present, then the monitor searches for a video signal
		from the other video input port. If the video signal is present in the other port, then the monitor
		switches the video source input port to the new found video source automatically.
		The monitor will not look for other video signals while the current video source is present.
	LAST DETECT	When the monitor is displaying a signal from the current source and a new secondary source
		is supplied to the monitor, the monitor will automatically switch to the new video source.
		When current video input signal is not present, the monitor searches for a video signal from
		the other video input port. If the video signal is present in the other port, then the monitor
		switches the video source input port to the new found video source automatically.
	VIDEO DETECT	DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over
		DVI, VGA, RGB/HV. When DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO
		input signal is present the monitor will change and keep to the DVD/HD1, DVD/HD2, SCART,
		VIDEO1, VIDEO2 or S-VIDEO input.
	CUSTOM DETECT	Set the priority of input signals.
		When CUSTOM DETECT is selected, monitor searches listed inputs only.
INPUT CHANGE		Sets input change speed.	NORMAL
		NOTE: When ÒQUICKÓ is selected, picture may be distorted when signal input is changed.
LONG CABLE COMP		Manually compensates for image degradation caused from using a long cable.
	EQUALIZE		OFF
	VGA, RGB/HV inputs only

POLE

Adjusts frequency.

0

PEAK

Adjusts equalizing value.

0

*: The product you purchased may not have this feature.

English-24