Alert Mail Setting
http://<the MonitorÕs IP address>/lanconfig.html
This option notifies your computer of an error message via
HOST NAME | Type in the hostname of the network connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
DOMAIN NAME | Type in the domain name of the network connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
ALERT MAIL | Checking [ENABLE] will turn on the Alert Mail feature. |
| Checking [DISABLE] will turn off the Alert Mail feature. |
|
|
SENDERÕS ADDRESS | Type in the senders address. Up to 60 alphanumeric and symbols characters can be used. |
|
|
SMTP SERVER NAME | Type in the SMTP server name to be connected to the monitor. |
| Up to 60 alphanumeric characters can be used. |
|
|
RECIPIENTÕS | Type in your recipientÕs address. Up to 60 alphanumeric and symbols characters can be used. |
ADDRESS 1 to 3 |
|
|
|
APPLY | Click this button to reflect the above settings. |
|
|
EXECUTE | Click this button to send a test mail to check if your settings are correct. |
|
|
STATUS | A reply to a test mail will be displayed. |
|
|
NOTE: ¥ If you execute a test, you may not receive an Alert mail.
Should this happen, check if the network settings are correct.
¥If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the RecipientÕs Address is correct.
TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu.
