NEC X461UN user manual English-22

SCHEDULE RESET		Resets the following settings within the SCHEDULE menu back to factory setting:	-
		OFF TIMER, SCHEDULE SETTINGS.
PIP
KEEP PIP MODE		Allows the monitor to remain in ÒPIPÓ and ÒTEXT TICKERÓ mode after powering off.	OFF
		When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
PIP MODE		Picture-in-Picture	OFF
	OFF	OFF
	PIP	PIP
	POP	POP
	SIDE BY SIDE (ASPECT)	SIDE BY SIDE ASPECT
	SIDE BY SIDE (FULL)	SIDE BY SIDE FULL
PIP SIZE		Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.	LARGE
	SMALL
	MIDDLE
	LARGE
PIP POSITION		Determines where the PIP appears on the screen.	X = 95, Y = 92
ASPECT		Selects sub picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17.	FULL
TEXT TICKER		Allow text insertion within main screen with the ability to adjust for direction, position, size,	OFF
		blend for transparency rate, detect and fade in. The TEXT TICKER and PIP functions cannot be
		used simultaneouslly. If the PIP function is on, it will be deactivated and vice versa if the
		TEXT TICKER is turned on.
SUB INPUT		Selects sub picture input signal.	Depend on signal input
PIP RESET		Resets PIP options back to factory settings except ASPECT and SUB INPUT.	-

OSD
LANGUAGE	Select the language used by the OSD.	ENGLISH
ENGLISH		(Depend on
		destination)
DEUTSCH
FRAN‚AIS
ITALIANO
ESPA„OL
SVENSKA
РУССКИЙ
OSD TURN OFF	Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.	30 Sec.
OSD POSITION	Determines the location where the OSD appears on the screen.	X = 128, Y = 225

UP

DOWN

LEFT

RIGHT

INFORMATION OSD	Selects whether the information OSD is displayed or not. The information OSD will be	ON, 3	Sec.
	displayed when the input signal or source changes. The information OSD will also give a
	warning when there is no-signal or the signal is out-of range.
	An interval between 3 to 10 seconds for the Information OSD to appear is available.
MONITOR INFORMATION	Monitor Information.	-
	CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon
	footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).

English-22