2.INSTALLATION
Screen Size and Projection Distance
Projector
1. Place your projector on a flat level surface at the optimal distance from the screen or wall so you
realize the size image you want. (Avoid having bright room lighting or sun light directly on the screen or wall where you’ll be projecting the image.)
Screen
2.Connect the power cable, remove the lens cap and turn the projector on. (If no input signal is avail-
able, the projector will display a black screen.) | Projector |
3. Ensure that the projector is square to the screen. |
|
|
4.Move the projector left or right to center the image horizontally on the screen.
5.To move the projected image up or down, select the Lens Control from the Operate menu.
6.Adjust the focus using the Lens Control on the Operate menu.
7.Increase or reduce the size of the projected image by using the ZOOM/PAN button on the remote control.
Ceiling Installation
Screen center
Lens center
Screen
Installing your MultiSync Hivid 6500 Projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information.
Do not attempt to install the projector yourself.
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Install in such a way that the projector and screen are positioned in the proper direction and at the proper angle. If not, the projector’ s performance will be affected and its reliability will decrease. Be sure to position the projector properly.
The manufacturer will not be held responsible for any problems occurring when the projector is not installed in the proper position.
If your projector is mounted on the ceiling and your image is upside down, use PJ ORIENTATION on the
| 26.93'' |
|
|
|
|
| ||
Projection distance |
| (684mm) |
| 11.61'' | ||||
|
| |||||||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| (295mm) |
|
|
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
Lens center
Vertical offset
Screen center
17