3.OPERATION

Execute Mode

Enables you to select connecting with the switcher ISS-6020 and view the projector address on the screen.

To do, follow the steps below.

1.Press the ADJUST button to display the Adjustment menu.

2.Use the CURSOR or button to select “8. Set Option” menu. Press ENTER.

3.Use the CURSOR or button to select “4. Execute Mode” menu. Press ENTER.

Proceed to the following steps.

Connect Condition

This setting explains how the projector is used with the ISS-6020/ ISS-6020G Switcher.

1Use the CURSOR or button to select the “1. Connect Condition” item, then press ENTER to display the ““1. Connect Condition” menu.

2Use the CURSOR or button to select your desired connec- tion condition of Switcher and press ENTER.

The “Re-Start ?” prompt is displayed after setting of the connec- tion condition is modified from the current status to your desired condition.

Items to select

Stand Alone ......... The projector used in stand alone operation.

SW 1 Level .......... The projector used with one Switcher.

SW 2 Level .......... The projector used with two or more Switchers.

3Use the CURSOR or button to select either “Yes” or “No” and press ENTER.

Items to select

Yes .......... Restart the projector.

No ........... Does not restart the projector.

NOTE: The selected connection condition becomes effective only after the projector is restarted.

- E x e c u t e M o d e -

1 . C o n n e c t C o n d i t i o n

2 . P J A d d r e s s

E x e c u t e M o d e

 

C o n n e c t C o n d i t i o n

 

 

[

S t a n d A l o n e

]

P J A d d r e s s

[ 0 1 ] ( 0 1 - 6 4 )

 

Connect Condition

Stand Alone

SW1 Level

SW2 Level

R e - S t a r t ?

Y e s

N o

71