| POWER | 1 | ||
DEGAUSS | OFF | ON | ||
2 |
|
|
| |
VIDEO 1 VIDEO 2 | RGB 1 | RGB 2 |
| |
POSITION/CONTROL | PROCEED | 3 | ||
5 | ||||
|
|
| ||
4 |
| EXIT | 6 | |
|
| |||
|
| SCAN |
| |
WIDTH HEIGHT | SIDE PIN NORMAL |
| ||
NORMAL
BRIGHT CONTRAST MUTE VOLUME
MULTIMEDIA MONITOR
79644641
11
NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel.
1POWER ON/OFFPress POWER ON to turn the monitor on when the STANDBY/POWER indicator is lit red.
Press POWER OFF to turn the monitor off and the monitor will go into the standby condition.
2DEGAUSSPress to demagnetize the picture tube in the manual operation. See also page 27.3Input SelectVIDEO 1 ..... Press to select an NTSC, PAL, SECAM or
VIDEO 2 ..... Press to select an NTSC, PAL, SECAM or
RGB 1 ....... Press to select an RGB video source from a computer connected to the RGB 1 IN terminal.
RGB 2 ....... Press to select an RGB video source from a computer, NEC scan converter or document camera connected to the RGB 2 IN terminal.
OSM Control4POSITION/CONTROLPOSITION( 
) ...... Adjusts the vertical position of the image up and down, and the horizontal position of the image from left to right.
CONTROL ( + / - ) ..... Moves the bar in the + or - direction to increase or decrease the adjustment in an OSM menu.
CONTROL(
/ 
) .. Select one of the controls in an OSM menu. Press 
to select a higher item in the menu; press
to select a lower item in the menu.
Press to access OSM. When an adjustment item is selected, a press of this button returns to its icon selection screen.
6EXITPress to exit the OSM mode.NOTE: The direct keys such as BRIGHT, CONTRAST, WIDTH, HEIGHT, SIDE PIN can access each control while in the OSM mode.
12
11