NEC XM37, XP37 Remote Control Cautions, Operating Range, Battery Installation and Replacement, 3. Close the battery compartment cover

15

Battery Installation and ReplacementThe remote control is powered by two 1.5V AA batteries.

1.Turn the remote control unit upside down. Press down on the battery compartment grip and slide the compartment in the direction of the arrow.

2.Install the two new batteries, making sure that their polarity matches the (+) (-) diagrams inside the battery compartment. Incorrect polarity could damage the remote control unit.

3. Close the battery compartment cover.

Remote Control Cautions

•Do not drop or mishandle the remote control unit.

•Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control unit for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types of batteries together.

•Do not take apart the batteries, heat them, or throw them into a fire.

Operating Range

•The infrared signal operates by line-of-sight up to a distance of approximately 22 feet/7 m and within a 60 degree angle of the remote sensor of the monitor.

•The monitor will not function if there are objects between the remote control and the sensor or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the monitor.

30￿￿ 30￿￿

	POWER
DEGAUSS	OFF	ON
VIDEO 1 VIDEO 2	RGB 1	RGB 2
POSITION/CONTROL		PROCEED
		EXIT
		SCAN
WIDTH HEIGHT	SIDE PIN NORMAL

NORMAL

BRIGHT CONTRAST MUTE VOLUME

16

13