NEC XM37, XP37 Specifications

47

Specifications

Picture tube	35 inch Visual size; 37 inch CRT size (Diagonal), Type M89LAK113K
	108 degree deflection
	Stripe trio pitch Ph 0.85 mm at center, Ph 1.05 mm at corner/Pv 0.87 mm
	Invar mask, Medium-short persistence phosphor
	Anti-static electricity coating
	Optical filter coating
	Dynamic focus

RGB Input Terminals	RGB 1 :	D-SUB 15pin/mini D-SUB 15pin		RGB 2: (R, G, B, H/CS and V)
	:	Video	: Analog 0.7Vp-p/75 Ohms (Positive)
	:	Sync.	: Separate Sync. TTL level, 0.7 - 4.0Vp-p/75 Ohms..........		RGB 2 only
			Horizontal Sync.	(Positive/Negative)
			Vertical Sync.	(Positive/Negative)
	: Composite Sync. TTL Level			(Positive/Negative)
	: Composite Sync. On Green Video 0.3Vp-p (Negative)

RGB Output Terminals	RGB 1 : D-SUB 15 pin/mini D-SUB 15 pin			RGB 2 : BNC (R, G, B, H/CS and V)
THROUGH OUT
Video Input Terminals	1.0Vp-p, 75 Ohms unbalanced (BNC-Jack), Composite video signal, Sync-negative.
VIDEO 1/2	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
S-VIDEO (Video 1/2)	C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.

Video Output Terminals
THROUGH OUT (Video 1, 2)	1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative.
THROUGH OUT (S-VIDEO 1, 2)	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
	C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
Audio Input Terminals	Left (Mono) : 0.5 Vrms, high impedance (Pin-Jack)
VIDEO 1, 2 / RGB	Right : 0.5Vrms, high impedance (Pin-Jack)

Audio Output Terminals	Left : 0.5 + 0.1			Vrms, less than 22 K Ohms (Pin-Jack)
THROUGH OUT	Right : 0.5	+	0.1	Vrms, less than 22 K Ohms (Pin-Jack)

External Control	mini D-SUB 15pin (IN/THROUGH OUT)
(IN/THROUGH OUT)

SOUND Output
Internal	2.5W+2.5W (THD 10%) at 16 Ohm
External	5W+5W (THD10%) at 8 Ohm

Speaker	Oval type 9 X 5.5 cm
	16 Ohm, 2pcs.

Display Colors	Analog Input: Unlimited colors
Synchronization Range	Horizontal: XP37Plus; 15.7/31 KHz to 95 KH XM37Plus; 15.7/31 KHz to 65 KHz (Automatically)
	Vertical:40 Hz to 120 Hz (Automatically)

48

11

Contents

Itasca,Illinois60143-1248 1250.NArlingtonHeightsRoad,Suite500 NECTechnologies,.Inc 37Plus R 37 Plus37 Plus Multimedia Monitor User's Manual CAUTION DOC compliance Notice ATTENTION DOC avis de conformation LIMITED WARRANTY NEC Multimedia Monitor Products HOW LONG IS THE WARRANTY WHO IS PROTECTED This warranty may be enforced only by the first purchaser CONTENTS 1. Introduction 2. Part Names and Functions 3. Installation 4. Operation Introduction The features you’ll enjoy include: Contents of the Package Part Names and Functions Rear View Terminal Board 1 POWER STANDBY/POWER 5 KEY CONTROL 6EXTERNAL CONTROL IN(D-Sub 15-pin) EXTERNAL CONTROL OUT (D-Sub 15-pin).....Connectto a second 7 REMOTE IN/OUT 8 RGB 1 (MultiCable) 75Ω/HIGH Impedance Select Switch.....This switch should be “75Ω” 9 RGB AUDIO 0 VIDEO /HIGH Impedance Select Switch for BNC type B RGB R, G, B, H/CS and V IN (BNC).....These are analog RGB input R, G, B, H/CS and V THROUGH OUT (BNC).....Connect to a second C EXT SPEAKER RIGHT + Remote Control Unit 1POWER ON/OFF 2DEGAUSS Press to demagnetize the picture tube in the manual operation. See also page 3Input Select Raster Control Visual Control Remote Control Cautions Operating Range Functions and Settings of DIP SW Installation Macintosh or IBM XGA/SuperVGA/VGA or Compatibles Compatibles EXTERNAL Connecting Your PC or Macintosh Computer 1.Turn off the power to your monitor and computer 4.Turn on the monitor and the computer Connecting Your VCR or Laser Disc Player 1.Turn off the power to your monitor and VCR or laser disc player Daisy-chainingYour monitors To do so: When using the VIDEO inputs: THROUGH OUT (VIDEO 1) Connections Connect THROUGH OUT 1 BNC or External Speaker Connections WARNING: CAUTION: IMPORTANT: Operation Power General Controls 1)To adjust: 1.Turn On The Monitor Direct Control Screen a. POSITION/CONTROL b. WIDTH f. NORMAL (raster) c. HEIGHT Visual Controls Group H-position/H-width/Pin-cushionControls Group H-POSITION :Pressing + or - moves the image horizontally right or left H-WIDTH PIN-CUSHION PIN-BALANCE RGB Controls Group COLOR TEMP R, G B-GAIN B-BIAS Reset Control The Reset control allows you to return image parameters to factory presets All Raster Settings The following items can be reset: Specific Item Settings OSM windows have the following elements: LANGUAGE VIDEO MODE POWER ON MODE KEY CONTROL Command reference External Control Command Communication Sequence Troubleshooting Specifications Page Dimensions 23.3 (590mm) 15.8 (400mm) Timing Charts Input Signal Reference Chart Separate Sync Sync. Polarity: Positive / Negative Composite Sync Composite Sync. & Video (Sync. on Green) Sync. Polarity: Negative Typical Input Signal Timing Vertical Frequency (O) Vertical Period (P) Vertical Pulse Width (Q) Vertical Back Porch (R) Vertical Active Area MODE Polarity State Frequency NEC On-siteService/Repair Policy DOA Policy