NEC XM37, XP37 Visual Controls Group, EXIT, PROCEED, Accessing OSM, selection of controls available, Press the EXIT key on the remote control or rear panel, EXIT, TINT, NOTE:

i. NORMAL( visual)

Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments.

31

j. MUTE

Press to turn off the sound for a short period of time; press again to restore the sound.

k. VOLUME

Press to increase the sound: press to decrease the sound.

NOTE:

When pressing a key that does not correspond to the function currently in use, the following message will be displayed on the monitor.

Accessing OSM

Press the PROCEED key on the remote control or rear panel. To turn off OSM

Press the EXIT key on the remote control or rear panel.

			VIDEO	RGB PROCEED
VIDEO 1 VIDEO 2 RGB 1	RGB 2		1	1
POSITION/CONTROL	PROCEED	PROCEED		EXIT
			2	2

EXIT

EXIT

OSM Menus

On-Screen Manager' s menu of Controls gives you an overview of the

selection of controls available.

Visual Controls Group

The visual controls allow you to adjust the picture controls such as brightness, contrast, color, tint, and sharpness.

BRIGHTNESS	: Pressing + or -	increases or decreases the image brightness level.
CONTRAST	: Pressing + or -	increases or decreases the image contrast level.
SHARPNESS	: Pressing + or - increases or decreases the image sharpness level.
COLOR	: Pressing + or - increases or decreases the image color saturation level
TINT	: Pressing + or - increases or decreases the red and green values.

NOTE: The color, tint and sharpness controls are not available for RGB input, and the tint is not available for PAL input.

NOTE: Pressing the visual NORMAL key resets all the visual controls to the factory settings when only the visual controls group icon is highlighted.

32

3