Reset ControlThe Reset control allows you to return image parameters to factory presets.All Raster Settings

The above warning statement will appear to confirm that you do want to reset all raster settings. If you want to reset all raster settings, press PROCEED.

The following items can be reset:

H-POSI, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER, V-POSI, V-HEIGHT, V-LIN1, V-LIN2, KEYSTONE, TILT and ROTATION.

Specific Item Settings

Specific adjustment item to be reset.

The above warning statement will appear to confirm that you do want to reset individual settings.

NOTE:

•In addition to OSM controls, adjustments can be directly accessed with the remote control keys. When adjusting with the remote control keys, the on- screen display for the related adjustment appears instead of the OSM menu.

•When OSM ON/OFF is set at OFF in the System Control menu(see the following section ), OSM controls are not available while the remote control direct access is possible.

37

All Visual Settings

The above warning statement will appear to confirm that you do want to reset all visual settings. If you want to reset all visual settings, press PROCEED.

The following items can be reset:

BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP., R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.

OSM System Control Menu

The OSM System control menu allows you to set a various conditions of the monitor.

NOTE: This control is available only when No. 8 pin of the DIP switch is set at the ON position. The DIP switch is located on the back cabinet.

OSM keys on the remote control unit function as follows:

POSITION CONTROL up/down : highlights one of the control items in the System

 

control menus.
POSITION CONTROL +: proceeds to the selected menu choice.
POSITION CONTROL -

: exits the current control and returns to its original

 

System control menus.

EXIT

: exits the OSM controls.

38

6