7

8 B

C

 

POWER

DEGAUSS

OFF

ON

VIDEO 1 VIDEO 2

RGB 1

RGB 2

POSITION/CONTROL PROCEED

EXIT

SCAN

WIDTH HEIGHT SIDE PIN NORMAL

NORMAL

BRIGHT CONTRAST MUTE VOLUME

MULTIMEDIA MONITOR

RD-346E

79644641

9

0

A D F

E

13

Raster Control

7WIDTH (+ / -)

Adjusts the horizontal size of the image.

8HEIGHT (+ / -)

Adjusts the vertical size of the image.

9SIDE PIN (+ / -)

Adjusts the curvature of the edges of the left and right side of the display image either inward or outward. The image should be adjusted to attain a

straight line on the left and right sides.

0SCAN SELECT

Each time this key is pressed, the picture size switches from OVER SCAN for large size to UNDER SCAN for small size and vice versa. Normally select OVER SCAN for video display and UNDER SCAN for RGB display.

ANORMAL

This key resets the raster adjustment settings of user changeable memory and recalls the factory preset data.

Visual Control

B BRIGHT ( / )

Adjusts the overall image and screen brightness.

Press and hold for a brighter picture.

Press and hold for a darker picture.

C CONTRAST ( /

)

Adjusts the image brightness in relation to the background.

Press and hold

for higher contrast.

Press and hold

for lower contrast.

NOTE: The VISUAL CONTROL storing operation is effective only for one input (VIDEO1, VIDEO 2, RGB 1 or RGB 2).

DNORMAL

This key resets the visual control settings and recalls the factory preset data.

NOTE: The brightness and contrast adjustment level are factory preset at the optimum position.

EMUTE

Press to cancel sound ; press again to restore sound.

NOTE: The other ways to restore sound are to press POWER OFF, then ON or to press VOLUME keys on the remote control unit.

FVOLUME ( / ) Adjusts the volume.

Press and hold to increase sound. Press and hold to decrease sound.

14

12