MW 6qt roaster 63807 10/25/01 2:26 PM Page 5 Sally Mercury:65946 Metalware books:63807:

5.If the Roaster Oven has not been preheated, turn the temperature control to its lowest setting. Plug the cord into a 120 volt AC outlet. Set the temperature control to the desired temperature. Fill the Cookwell with food as desired.

6.Cook the food for the desired amount of time. When finished, turn the temperature control to its lowest setting, unplug the cord from the 120 volt outlet and then disconnect from the Roaster Oven. Allow the Roaster Oven to cool and clean as recommended below.

COOKWELL, COVER AND ACCUMULATED STEAM WILL BE HOT. USE CAUTION AND HOT PADS TO LIFT COVER OR REMOVE COOKWELL FROM HEATWELL.

Care And Cleaning

1.After the NESCO Roaster Oven has cooled, remove Cover, Rack (if used) and Cookwell. Wash in warm sudsy water or place in the dishwasher. CAUTION–do not put Cover in the dishwasher.

2.Cooked-on food may be removed by using a non-abrasive cleaning pad and non-abrasive cleansers. Do not use abrasive cleaners or steel wool as porcelain enamel or non-stick finish may scratch. Use a plastic scrubbing pad to remove stains or cooked-on foods, and also to clean the steel Rack.

HINT: To easily remove baked-on food residue, place Cookwell in Heatwell; then fill Cookwell with hot water. Cover and heat at 350ºF for 30 minutes. Turn off and allow to cool completely. Wash cookwell as directed above.

3.NEVER IMMERSE THE ROASTER OVEN IN WATER. To clean, wipe outside of Roaster Oven with a damp cloth and dry. Do not use abrasive cleansers on exterior surface.

4.The revolutionary QuanTaniumsurface is the first non-stick reinforced with space age titanium. QuanTaniumprovides maximum resistance to wear and abrasion, and is safe to use with all metal utensils. It will stay attractive, not stain and provide easy

cleaning and years of use. However, it will chip if subjected to sharp blows or is mistreated. Water spots or mineral deposits (characterized by a white film on surface) may be removed with household vinegar or non-abrasive cleanser.

Helpful Hints

PREHEAT ROASTER OVEN FOR 20 MINUTES.

ROAST

Roasting meat in your NESCO Roaster Oven keeps it moist and tender. For additional browning, you can add 1 tbsp. browning sauce to oil and brush over skin before roasting.

A 3 lb. to 4 lb. roast with bone is the maximum size suggested for the

6 Quart Roaster Oven. Larger roasts, especially with a bone, may be difficult to fit into the Cookwell. If meat and poultry are refrigerator cold, increase cooking time about one-half hour. If frozen, allow an additional 15 to 20 minutes per 1 lb. cooking time.

To sear meat: Preheat Roaster Oven at 425ºF. Add margarine. Cover, then sear meat for 5 to 10 minutes per side until lightly browned. Stir ground meat once. Time will vary depending on the quantity of meat.

COOK

Food may be placed in a cold or preheated Roaster Oven. Follow recipe directions for temperature settings.

Cut-up meats and vegetables should be of uniform size pieces.

Remember, little moisture escapes during slow cooking, so add additional liquid sparingly.

3

6 Qt. Roaster Oven

Page 5
Image 5
Nesco 6-QT manual Care And Cleaning, Helpful Hints