Diagnostics, System Status, System Log

Chapter 9 – Diagnostics

Diagnostic tools give you an idea about the current health of your device.

The System Status page displays the LAN settings and the device firmware installed in the device.

1.From the Web User Interface, click System Menu.

2.Select System Status. This opens the Status page.

The System Log page displays a record of all the device activities.

To download the Security Log:

1.From the Web User Interface, click System Menu.

2.Select System Log. This opens the Security Log page.

18	NP290W User Guide
	YML849Rev 1

Image 18

Contents

User Guide Contents Introduction Typical NP290W Turbo Wireless HomePlug ConnectionPackage Contents Minimum Requirements NP290W Turbo Wireless HomePlug Overview Light Indicators and Ports IP Address you used if you changed the default Hardware InstallationTo connect the HomePlug Wireless Adapter with a computer Open a browser Accessing the Web User Interface Using the CD Setup UtilityTo use the CD Setup Utility To access the Web User Interface Open a browser Configuring TCP/IP To connect with wireless devices for Microsoft XP Locate your wireless network connection icon About the Web User Interface Navigation Menus and Submenus Changing the Administrator Password Advanced ConfigurationAdministrator Settings Retype password Enter Auto-logout Time Click Save Remote HomePlugs Detecting HomePlug DevicesChanging the Private Network Name Local HomePlugs LAN Settings Private Network Name Reset Firmware Upgrade Restore to Factory DefaultBackup Settings Restore Settings Reboot To configure the wireless settings Wireless SettingsSettings Select Settings. This opens the Wireless Settings To configure the wireless security settings SecuritySelect an Encryption Type None Then click Connect AP AP ModeDefault Administrator password is admin Click OK. This takes you back System Log DiagnosticsSystem Status To display the system status Safety Summary Messages Important Safety Instructions NP290W User Guide