NetComm manual NP290W Turbo Wireless HomePlug Overview, Light Indicators and Ports

Chapter 2 – NP290W Turbo Wireless HomePlug Overview

2.1Light Indicators and Ports

The NP290W Turbo Wireless HomePlug has four light indicators (LEDs). See Figure 2 below.

Power LED

PL-Act LED

Wireless LED

Ethernet LED

Ethernet Port

		Figure 2 : Light Indicators
Icon	LED Status	Description
	ON	When power is supplied to the NP290W Turbo Wireless HomePlug.
	ON	When detected and connected with another HomePlug Adaptor within the
		network.
	Flicker	When the NP290W Turbo Wireless HomePlug is transmitting / receiving data.
	Flash	When the Wireless LAN is operational.
	ON	When the Ethernet cable is properly connected from your NP290W Turbo
		Wireless HomePlug to the Ethernet Card.
	Flicker	When the Ethernet is transmitting / receiving data.

The Ethernet Port is a 10/100 Base-T Auto-MDI/MDIX (allows either cross or straight cable) Ethernet jack (RJ-45) to connect to your Ethernet Network card or Ethernet Router/Modem or Ethernet Hub/Switch.

The Reset button is used to reset the NP290W Turbo Wireless HomePlug to its factory defaults. To reset the NP290W Turbo Wireless HomePlug, simply press the reset button for about 5 seconds.

Note: all customised settings that you have saved will be lost!

NP290W User Guide YML849Rev 1