
• The local lights are lit for any connected computers.
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your wireless modem router to set it up initially and to make any changes to your wireless router’s settings later.
The factory default state is reset when you use the Restore Factory Settings button. See “Restoring the Default Configuration and Password” on page 32 for more information.
To access the router:
1.Type http://192.168.0.1 in the address field of your browser, and then click Enter..
You can also enter either of these addresses to connect to your wireless router: http://www.routerlogin.net or http://www.routerlogin.com.
A login screen similar to the one shown in the following figure displays:
Figure 11
16 | Installing Your Router Manually (Advanced, Mac, and Linux Users) |