NETGEAR DM111PSPv2 user manual Inbound Firewall Traffic Rules

	ADSL2+ Modem Router DM111PSPv2 User Manual
Table 3-1. Outbound IP Filtering Rule Settings (continued)
Settings	Description
Source IP Address	Make a selection from the drop-down list:
	• ALL. The rule applies to all source IP addresses.
	• SINGLE. Enter the source IP address in the “IP addr.” field.
	• SUBNET. Enter the source IP address in the “IP addr.” field and the subnet
	address in the “NetMask” field.
Destination IP Address	Make a selection from the drop-down list:
	• ALL. The rule applies to all destination IP addresses.
	• SINGLE. Enter the destination IP address in the “IP addr.” field.
	• SUBNET. Enter the destination IP address in the “IP addr.” field and the subnet
	address in the “NetMask” field.
Port Range	You can specify a port range only when TCP, UDP, or User Defined is selected
	from the Protocol drop-down list. Enter the start port for the port range in the
	“Start” field and enter the end port for the port range in the “End” field.

Inbound Firewall Traffic Rules

When the Inbound Traffic radio button is selected and you click Add in the Firewall Rules screen (see Figure 3-1 on page 3-3), the Add New Inbound IP Filtering Rule screen displays:

Figure 3-3

Security and Firewall Protection 3-5

v1.0, December 2008