ADSL2+ Modem Router DM111PSPv2 User Manual
5-4 Advanced WAN Configuration
v1.0, December 2008
3. Click Next to continue. The Connection Type screen displays.4. Enter or select the Internet connection type settings that are explained in the following table. Your ISP will advise you which settings to use.
Figure 5-3
Table 5-3. Internet Connection Type Settings
Setting Description
Protocol • PPP over ATM (PPPoA)
• PPP over Internet (PPPoE)
• IP over ATM (IPoA)
• Bridging
Encapsulation
Type
• LLC/SNAP (the default setting)
•VC MUX
Enable QoS Quality of Service (QoS) support is enabled by default.
Enable 802.1Q
VLAN Tagging
This settings, which is available only in PPPoE and bridged mode, allows multiple
computers to share the same physical network.