SATO GL408/412E Recognize these alternate control characters, Is the SFCC-Terminator, Backward U2

			Unit 4: Printer Configuration
			TGL EMULATION MODE (TABLE 4-13)
MENU			DESCRIPTION
	Special Function Control Code. These codes are specific to the delimiters of separate print jobs
	and commands. They can be customized and therefore changed via this menu so the printer can
	recognize these alternate control characters.
	• Auto Select - factory default. The printer selects the SFCC set based upon the received host
		data.
	•	<ESC><LF><NUL> - is a predefined set. The ESC character is the SFCC, the LF is the
		SFCC-Separator, and the NULL character is the SFCC-Terminator.
SFCC Select
	•	{ I } - is a predefined set. The { character is the SFCC, the I is the SFCC-Separator, and the }
Auto Select*
		is the SFCC-Terminator.
	•	User Defined - if this option is selected, three additional menus appear. These menus allow
		the SFCC, SFCC-Separator, and SFCC-Terminator to be individually configured.
		•	SFCC - can set value between 0x0 and 0xFF. The factory default is 0x7B.
		•	SFCC Separator - can set value between 0x0 and 0xFF. The factory default is 0x7C.
		•	SFCC Terminator - can set value between 0x0 and 0xFF. The factory default is 0x7D.
	This menu allows the position of the EURO symbol in the cold pages to be configured. The
	EURO symbol can be set to any value between 0x20 and 0xFF.
EURO Symbol
	The factory default is 0xB0.
0xB0*
	Speed Commands. Determines if engine commands that affect the print/feed speed will be
	processed or ignored. To adjust the print/feed speed through the operator panel, use this menu to
	prevent the host commands from overriding these settings. When Ignore is selected, the TGL
	ignores the following comands or command parameters:
Speed CMDs	•	The print speed parameter in the XS command. The parameter will not have an effect; the
Process*
		Print Speed value as configured in the Media Control menu will be used.
	•	The feed speed parameter in the T command. The parameter will not have an effect; the
		Slew Speed value as configured in the Media Control menu will be used.
	The factory default is Process.
	Allows the selection of how the printer will respond to print intensity (darkness) commands.
	•	Process - factory default. Sent commands from the host take precedence.
AY Intensity CMD
Process*	•	Ignore - printer settings take precedence.
	Allows the selection of how the printer will respond to commands to move paper forward (U1) or
	backward (U2).
U1/U2 Move CMDs	•	Process - factory default. Sent commands from the host take precedence.
Process*
	• Ignore - printer settings take precedence. The paper will not be moved when either
		command is received.
	XS Sensor Parameter. Allows the selection of how the printer will respond to the XS command
	setting the sensor type parameters.
XS Sensor Param	•	Process - factory default. Sent commands from the host take precedence.
Process*	•	Ignore - printer settings take precedence. The paper will not be moved when either
		command is received. TGL will use the sensor type as configured through Gap/Mark Sensor
		under the Calibrate CTRL menu.
	Defines which media mode TGL will operate on receipt of a ‘C’ (strip mode) from the issue mode
	parameter in the XS command. Any of the supported media modes can be selected.
XS Media ‘C’ Act	•	Continuous - factory default. Sent commands from the host take precedence.
Continuous*
	•	Ignore - will use the issue mode as configured through Media Handling under the Media
		Control menu.

GL408-412e Operator Manual 4-77 PN: 9001163A