SATO GL408/412E manual This menu selects the character set used by the printer, Margin, Received

		Unit 4: Printer Configuration
		PGL EMULATION MODE (TABLE 4-10)
MENU		DESCRIPTION
	This menu selects the character set used by the printer.
Character Group
Standard Sets*
	Provides access to the desired character set.
Standard Sets
0) ASCII*
	Lines Per Inch. This menu allows the quantity of lines that will be printed in a linear inch to be
	selected. Example: at 6 LPI, there is 1/6 inches from the top of one line to the top of the next.
Select LPI
	The allowable options are 6.0, 8.0, and 10.3 LPI. The factory default is 6.0 LPI.
6*
	This menu controls the action of the printer when it receives a Carriage Return code (0D Hex)
	from the host computer. If this feature is enabled, each time the printer receives a carriage return,
	it inserts an additional Line Feed code (0A Hex) into the data stream. Do not use this feature if the
	host computer sends line feeds to the printer.
Define CR Code
	•	CR = CR - factory default. Does not insert an extra line feed after each carriage return.
CR= CR*
	•	CR = CR + LF - inserts an extra line feed after each carriage return. The next print position
		will be print position 1 of the next line.
	Note: For this menu to take effect in PGL, PGL Normal must be set to PGL Menu.
	This parameter forces the printer to insert an automatic Carriage Return code into the data
	stream whenever a Line Feed code occurs. This can be used in most installations, but is required
	if the host computer does not send carriage returns to the printer.
	•	LF = LF - factory default. Does not perform an automatic carriage return. The next print
Define LF Code
LF= LF*		position will be at the current print character position on the next line.
	•	LF = CR + LF - performs an automatic carriage return. The next print position will be print
		position 1 of the next line.
	Note: For this menu to take effect in PGL, PGL Normal must be set to PGL Menu.
	This parameter determines if text will wrap to the next line when the line of text exceeds the right
	margin.
Autowrap	•	Disable - factory default. Truncates the text beyond the right margin until a CR or CR + LF is
Disable*
		received.
	•	Enable - automatically inserts a CR + LF after a full print line.
	This parameter enables the printer to print text in all uppercase when using the ALPHA
	command.
Auto Uppercase
	•	Disable - factory default. Will print in upper and lowercase.
Disable*
	•	Enable - will print text only in uppercase.
	This parameter allows printing the zero numeral with or without a diagonal slash through it. This
	option applies to all character sets except OCR-A and OCR-B.
Slash 0
	•	Disable - factory default. Zero will be printed without a slash.
Disable*
	•	Enable - zero will be printed with a slash.

GL408-412e Operator Manual 4-64 PN: 9001163A