SATO GL408/412E Ignored, No all data is is passed to the LP+ emulation, Result in faster printing

	Unit 4: Printer Configuration
	TGL EMULATION MODE (TABLE 4-13)
MENU	DESCRIPTION
	Is the menu selection screen for the EMULATION Mode.
TGL Setup
Active
Print Errors
Character Set
Slash Zero
Image Scale
SFCC Select
EURO Symbol
Speed CMDs
AY Intensity CMD
U1/U2 Move CMDs
XS Sensor Param
XS Media ‘C’ Act
XS Media ‘D’ Act
AR Pre-Feed CMD
AX Fine Adj. CMD
Page alignment
Vert. DPI Adjust
Status Response
	Allows the selection of how the printer will respond to non-TGL format text to either be printed or
	ignored.
	• Yes - factory default. All data is parsed by the TGL emulation. Non-TGL data is absorbed.
Active
Yes*	• No - all data is is passed to the LP+ emulation.
	For information on setting the LP+ Text Mode through the host data stream, refer to the TGL
	Programming Reference manual.
	Determines where and how errors will be displayed.
	• Disable - factory default. Errors display only on the printer’s LCD.
Print Errors
Disable*	• Enable - errors are printed and displayed on the printer’s LCD.
	Allows the character set to be selected.
	The options are PC-850, PC-8, or 8859-2 Latin 2. The factory default is PC-850.
Character Set
PC-850*
	Determines if a zero numeral will be printed with a diagonal slash.
	• Disable - factory default. The zero character does not have a slash.
Slash Zero
Disable*	• Enable - the zero character is overlayed with a slash.
	Determines if an imaged will be scaled according to the printer’s print resolution.
	• Disable - factory default. Scaling will not take place, resulting in images that are 2% larger
	than images printed on the TEC printer. The image will maintain the correct proportions and
Image Scale
Disable*	result in faster printing.
	• Enable - images are scaled from TEC printer resolution (306 dpi) to the resolution of the TGL
	printer (300 dpi).

GL408-412e Operator Manual 4-76 PN: 9001163A