SATO GL408/412E manual Parallel Interface Mode Table

		Unit 4: Printer Configuration
		SERIAL INTERFACE MODE (TABLE 4-4)
MENU		DESCRIPTION
	This option is for the Series1 protocol. After receiving a poll character, the printer will wait the poll
	response time in milliseconds before sending the response.
Poll Response
	The allowable range is 0 to 30 ms, and the factory default is 0 ms.
0 ms*
	This option is for the Series1 protocol.
	•	Disable - factory default.
Idle Response
Disable*	•	Enable - the printer sends a response character every two seconds while the quanity of valid
		bytes in the buffer is less than 75 percent of the buffer size.
	One Character Enquiry. This mode uses the poll character to detect a request from the host and
	sends a response back to the host.
One Char Enquiry
	•	Disable - factory default. Poll character will not detect.
Disable*
	• Enable - poll character will detect.
	If enabled, allows the printer to respond according to two different response tables when an ENQ
	command is sent to the printer.
	•	Disable - factory default. A response is not sent.
Printer Status
	•	ENQ/STX - when the printer receives an ENQ, the printer responds with a status according
Disable*
		to ENQ/STX parameters.
	•	ENQ - when the printer receives an ENQ, the printer responds with a status according to
		ENQ parameters.
	These are possible errors that can occur when serial interface settings of the printer do not match
	those of the host computer.
Framing Errors	•	Enable - factory default. If a framing error occurs, a fault message will display on the
Enable*
		operator panel.
	•	Disable - if a framing error occurs, a fault message will not display on the operator panel.
		PARALLEL INTERFACE MODE (TABLE 4-5)
MENU		DESCRIPTION
	Permits entry into the INTERFACES Mode.
INTERFACES
	Is the menu selection screen for the INTERFACES Mode.
INTERFACES
Ignore CR/LF
Item No. Check
BCC Check
History Buffer
Comm. Protocol
Host Interface
Parallel Port
USB Port
Serial Port
Printer Mgmt

GL408-412e Operator Manual 4-44 PN: 9001163A