SATO GL408/412E manual Diagnostics Mode Table

		Unit 4: Printer Configuration
		DIAGNOSTICS MODE (TABLE 4-15)
MENU		DESCRIPTION
	Allows varification of proper printer operation and print quality through the selection of various
	test print options.
	• Checkerboard - factory default. Helps identify marginal print head elements, edge
		sharpness, and uneven print quality.
	•	Grey - helps identify burned out print head elements and uneven print quality.
	•	Grid - helps identify edge sharpness and uneven print quality.
	•	Current Config. - prints the current printer configuration and helps determine text print
		quality.
	•	Left Test - prints a pattern containg a series of ladder-type bar code symbols starting with
		four and decrementing by one symbol on each print until a single symbol prints on the left
		side.
Printer Tests	•	Right Test - prints a pattern containg a series of ladder-type bar code symbols starting with
Checkerboard*		four and decrementing by one symbol on each print until a single symbol prints on the right
		side.
	•	Combo Test - prints a combined left and right side test.
	•	Ethernet Test - prints the NIC statistics stored on its adapter. Only appears if the Network
		Interface Card (NIC) adapter is installed.
	•	Barcode Demo - prints text and barcodes with the barcodes positioned at the left and right
		margins of the standard label media suplied with the printer. The test automatically produces
		output for 4 inch printers at 203 and 305 dpi.
	• RFID Report - prints a report of RFID statistics since the printer was powered on or since the
		last data reset. Once the desired test pattern is chosen, press ENTER t ostart printing. If the
		Test Count option is set to Continuous (factory default), press ENTER again to stop printing.
		Only appears if the RFID encoder is installed.
	This menu screen enables the quantity of times the selected test pattern will be printed. The
	options are Continuous (factory default), 1 Page, 2 Pages, 5 Pages, and 10 Pages.
Test Count
5 Pages*
	This menu screen allows the entry of the reference number which includes toe program file part
	number and the revision number of the software installed in the printer (e.g., 358186 V1.07G).
Software Build
XXXXXX VX.XXX
	Allows the determination of whether printer will print a label containing data sent from the host in
	hexadecimal format.
Hex Dump Mode
	• Disable - factory default. Will not print.
Disable*
	• Enable - will print.
	This menu screen permits the printing of the current log of errors. Most non-routine faults (Ribbon
	Fault, Print Head Hot) are stored in the error log.
DIAGNOSTICS
Print Error Log
	Is a subset of menu screens that permits the error log to be cleared.
DIAGNOSTICS
Clear Error Log

GL408-412e Operator Manual 4-83 PN: 9001163A