SATO GL408/412E manual Follow, Into the applicable menus, Factory default is None

	Unit 4: Printer Configuration
	SERIAL INTERFACE MODE (TABLE 4-4)
MENU	DESCRIPTION
	Is the main menu screen for the Host Interface option of the INTERFACES mode. There are only
	two options relative to the serial interface, ignore all others.
	• Serial - factory default. Allows the operator to select the interface and the relative menus will
Host Interface
Serial*	follow.
	• Auto Switching - the printer automatically switches to the relative interface type and moves
	into the applicable menus.
	Is the menu selection screen for the Serial Port option of the INTERFACES mode.
Serial Port
Baud Rate
Word Length
Stop Bits
Parity
Data Protocol
Buffer Size in K
Trickle Time
Time Out
Report Status
Data Term Ready
Request to Send
Poll Character
Poll Response
Idle Response
One Char Inquiry
Printer Status
Framing Errors
	Allows setting the baud rate for the serial interface. The baud rate is the speed serial data is
	transferred between the host computer and the printer. The options for RS232 and RS422 are
	600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud.
Baud Rate	Note: If using RS232 and the selected baud rate is greter than 19200, data loss may occur. To
19200*
	correct this, it may be necessary to lower the baud rate or use RS422. An increase in the Buffer
	Size in K parameter from the default (1 Kbyte) may be required to improve performance.
	The factory default is 9600.
	This menu allows the length of the serial data word to be set. The data word length can be set to
	7 or 8 bits and must match the corresponding data bits setting in the host computer.
Word Length
	The factory default is 8.
8*
	This menu allows the quantity of stop bits in the serial word to be set. either 1 or 2 stop bits may
	be selected, but the setting must match the corresponding stop bit setting in the host computer.
Stop Bits
1*
	This menu screen allows the parity to be set, but the setting must match that of the host
	computer. The options are: Odd, Even, Mark, Sense, or None.
Parity
	The factory default is None.
None*

GL408-412e Operator Manual 4-41 PN: 9001163A