SATO GL408/412E Presented in the UPC/EAN barcodes, No Change factory default, Smaller barcodes

		Unit 4: Printer Configuration
		USER MODE (TABLE 4-1)
MENU		DESCRIPTION
	This setting changes the vertical base reference point for the current label job and all subsequent
	label jobs. Its effect is identical to the <ESC>A3 Base Reference Point command.
Ver BaseRefPoint
0 dots*
	This setting changes the horizontal base reference point for the current label job and all
	subsequent label jobs. Its effect is identical to the <ESC>A3 Base Reference Point command.
Hor BaseRefPoint
0 dots*
	This parameter allows the printing of bar code descenders when human readable data is not
	presented in the UPC/EAN barcodes.
	•	No Change - factory default.
UPC Descenders
Always*	•	Always - factory default. UPC/EAN bar codes are printed with descenders even if human
		readable data is not present.
	•	Never - UPC/EAN bar codes are printed without descenders.
	Allows fine adjustment of resolution used to scale page elements/coordinates. In cases where the
	printed label length is incorrect, the vertical resolution value used for calculations can be fine
	adjusted by this menu between -100and +100.
Vert. DPI Adjust
0*	Negative values result in a lower DPI value and thusly a longer label. Positive values result in a
	higher DPI value resulting in a shorter label. This adjustment does not affect the size of images
	and downloaded bitmap fonts.
	Allows compatibility with older SATO printer models. By selecting ‘Automatic’ enables the printer
	to encode C128 bar code data using automatic mode switching. This action generally results in
C128 Mode Switch
	smaller barcodes.
Manual*
	If enabled, the printer will beep if an invalid code is deleted in the format file being downloaded/
	printed.
Error Handling
Beep*
	Specifies the memory assigned to parameters 1 and 2 of <ESC>CC command.
	If the operator panel selection is set to Card, the command <ESC>CC1 declares that the memory
Mem Select (CC1)
	cartridge is to be used to recall/store data (graphic & font) and CC2 is to be used to access
Card*
	internal flash memory.
	If the operator panel selection is to Memory, the above scenrio is reversed.
	This menu screen allows the image orientation on the printed label to be determined.
	•	Portrait - specifies vertical page orientation with page height being greater than its width.
		The top-right corner of the image is positioned in the media’s leading right corner.
	•	Landscape - specifies horzontal orientation with page width being greater than its height.
Orientation
		The top-left corner of the image is positioned in the media’s leading left corner.
Portrait*
	• Inv. Portrait - specifies vertical page orientation with page height being greater than its width.
		The bottom-right corner of the image is positioned in the media’s trailing left corner.
	•	Inv. Landscape - specifies horizontal orientation with page width being greater than its
		height. The top-right corner of the image is positioned in the media’s trailing right corner.

GL408-412e Operator Manual 4-24 PN: 9001163A