SATO GL408/412E manual Media Platen Roller Replacement

Unit 6: Maintenance

MEDIA PLATEN ROLLER REPLACEMENT

The media platen roller is considered to be a high-wear component due to constant treading of the print media against its contact surface. This constant contact will eventually wear grooves into the rubber material and negatively affect print output.

To replace the platen roller, loosen the securing the retaining bracket to the lower print assembly, then withdraw the bushing from the end of the platen roller assembly. Withdraw the worn platen roller assembly from the printer and insert its replacement in its place.

Insert the bushing onto the end of the platen roller assembly, reposition the retaining bracket over the bushing, and retighten the screw.

Platen Roller Assy

Lower Print Assy

Screw

Retaining Bracket

Bushing

Figure 6-3, Media Platen Roller Replacement

GL408-412e Operator Manual 6-5 PN: 9001163A